Tap water in Florida's largest cities meets current EPA rules on the records we track. Jacksonville, FL, Miami, FL, Tampa, FL and St. Petersburg, FL each show zero health-based violations in the past 10 years, and their lead results are far below EPA's 15 ppb action level. Two things stand out: PFOA and PFOS above EPA's April 2024 limits in much of South Florida and the Tampa area, and a small group of rural towns with long violation records or high lead.
Our Florida page covers 376 cities using public EPA, Census and utility records, with data updated in October 2026. Below we look at the big cities first, then the places that need a closer look, then hardness and radon. Hardness and radon are the other two questions Florida renters and homeowners usually ask.
Florida tap water in the largest cities
The table lists Florida's largest cities by population. The lead figure is the 90th percentile result: 90% of the utility's home tap samples were at or below it. It describes the water system, not the pipes in any one home.
| City | Population | Lead, 90th pct (ppb) | PFAS over 2024 limits | Health violations, 10 yrs | Hardness | Radon zone |
|---|---|---|---|---|---|---|
| Jacksonville, FL | 1,009,833 | 1.5 | None | 0 | Very hard | 3 |
| Miami, FL | 487,014 | 3.1 | PFOA, PFOS | 0 | Very hard | 2 |
| Tampa, FL | 414,547 | 1.5 | PFOA, PFOS | 0 | Hard | 2 |
| Orlando, FL | 334,854 | 2 | None | 1 | Moderately hard | 3 |
| St. Petersburg, FL | 267,102 | 1.8 | None | 0 | Hard | 3 |
| Port St. Lucie, FL | 258,575 | 4.6 | None | 0 | No data | 3 |
| Hialeah, FL | 235,388 | 0.9 | PFOA, PFOS | 0 | Very hard | 2 |
| Cape Coral, FL | 233,025 | 1.4 | None | 1 | Moderately hard | 3 |
| Tallahassee, FL | 205,089 | 1.4 | PFOS | 0 | Hard | 2 |
| Fort Lauderdale, FL | 190,641 | 4.9 | PFOA, PFOS | 0 | Soft | 3 |
| Pembroke Pines, FL | 179,326 | 0.6 | PFOA, PFOS | 5 | Soft | 3 |
| Hollywood, FL | 159,073 | 3.5 | PFOA, PFOS | 0 | Soft | 3 |
| Gainesville, FL | 148,720 | 0.7 | None | 0 | Hard | 2 |
No large city in the table comes close to the current lead action level. The highest are Fort Lauderdale, FL at 4.9 ppb and Port St. Lucie, FL at 4.6 ppb, both under the FDA's 5 ppb limit for bottled water and well under the 10 ppb action level that takes effect in November 2027. EPA's health goal for lead is zero, though, so a low system number doesn't rule out lead from older plumbing in a particular building.
PFAS is the main issue in South Florida
In April 2024 EPA set enforceable limits of 4 parts per trillion for PFOA and PFOS, and 10 ppt for PFHxS, PFNA and GenX. In May 2025 EPA said it intends to keep the PFOA and PFOS limits, push the compliance deadline to 2031, and rescind the other three. Our comparisons use the 2024 limits.
PFOA and PFOS above those limits show up across Miami-Dade and Broward: Miami, FL, Hialeah, FL, Fort Lauderdale, FL, Hollywood, FL, Coral Springs, FL, Pompano Beach, FL and Miami Beach, FL. Tampa, FL and Palm Bay, FL are on the list too. Orlando, FL, Jacksonville, FL, St. Petersburg, FL and Gainesville, FL show no PFAS over the 2024 limits.
A few systems go beyond PFOA and PFOS. Pensacola, FL is over the limits for PFOA, PFOS, PFHxS and PFNA, and Ocala, FL and Zephyrhills, FL are over for PFHxS as well. PFHxS and PFNA are two of the limits EPA plans to rescind, so those results may lose their enforceable benchmark. The PFOA and PFOS results are the ones expected to stay.
The towns that stand out for lead or violations
The biggest problems are in small systems, not big cities. Palatka, FL is the only Florida city in our data with a lead result above the current 15 ppb action level, and it also has the most health-based violations. Two more towns are above the 10 ppb level that applies from November 2027.
| City | Population | Lead, 90th pct (ppb) | Health violations, 10 yrs | What stands out |
|---|---|---|---|---|
| Palatka, FL | 10,867 | 16.8 | 33 | Lead above 15 ppb action level |
| Alachua, FL | 10,856 | 14 | 0 | Lead above the 2027 level |
| St. Marks, FL | 312 | 11.5 | 0 | Lead above the 2027 level |
| Jennings, FL | 772 | 9.9 | 0 | Lead just under 10 ppb |
| Avon Park, FL | 10,415 | 9.6 | 0 | Lead plus PFOA, PFOS |
| Apalachicola, FL | 2,461 | 3 | 26 | Repeated violations |
| Fort White, FL | 669 | 0 | 25 | Repeated violations |
| Perry, FL | 7,306 | 4.5 | 20 | Violations plus PFOS |
| Dundee, FL | 6,275 | 2 | 17 | Repeated violations |
| Riviera Beach, FL | 39,620 | 2.4 | 10 | Violations plus PFOA, PFOS |
Among mid-size cities, Winter Springs, FL has 8 health-based violations in 10 years and Lauderhill, FL has a lead result of 8 ppb. If you live in one of these places, open the city page and read which violations were recorded and whether they've been resolved.
What the data can and cannot tell you
These figures come from EPA records and utility reports, and the two don't always match. Several Miami-Dade suburbs, including Doral, FL and Coral Gables, FL, show the same 3.1 ppb lead figure as Miami, FL because they are served by the same system. A city-level number describes the utility. Your own tap can differ because of your building's pipes and fixtures, and only a test at your faucet tells you what's in your glass. Our methodology explains how we match systems to cities.
Why Florida water tastes and feels different
Florida water tends to be hard. Jacksonville, FL, Miami, FL and Hialeah, FL are very hard (180 mg/L and above), and Tampa, FL, Tallahassee, FL and Gainesville, FL are hard (120 to 179 mg/L). Broward cities are the exception: Fort Lauderdale, FL, Pembroke Pines, FL and Hollywood, FL are soft (below 60 mg/L). Hardness affects scale and soap, not whether water meets EPA rules. Your utility may report it in grains per gallon. One grain equals 17.1 mg/L.
Disinfectant varies too. Miami, Tampa and most of Broward use chloramine, while Jacksonville, Orlando and Tallahassee use chlorine. Chloramine is harder to remove, so if taste is the issue, choose a filter rated for chloramine, not just chlorine.
Radon in Florida homes
The Florida cities in our data fall in EPA radon Zone 2 or Zone 3, not Zone 1. Miami-Dade cities, Tampa, FL, Tallahassee, FL and Gainesville, FL are in Zone 2, with a predicted county average between 2 and 4 pCi/L. Radon zones describe counties, not houses, and high readings turn up in every zone. EPA recommends testing every home and fixing it at 4 pCi/L or above. See the Florida radon page for county detail.
What to do next
- Look up your city on the Florida page and check its lead result, PFAS list and violation history.
- If your city shows PFOA or PFOS over the 2024 limits, use a filter certified for PFAS reduction. Reverse osmosis and certified carbon block filters are the common options.
- If your home has older plumbing or your city's lead number is high, use a filter certified for lead and test water from your own tap.
- In very hard water areas such as Jacksonville or Miami, compare softener quotes through /quote/.
- Test your home for radon whatever your zone, and get mitigation quotes at /quote/ if the result is 4 pCi/L or higher.