Mold · November 3, 2026

Mold Inspector License: Which States Require One and How to Check

Only a few states license mold inspectors or remediators. See the rules in Texas, Florida, New York, Louisiana, DC and more, plus how to verify a license.

Only a handful of places require a mold inspector license: Texas, Florida, New York and Washington DC license both mold assessors and mold remediators, Louisiana licenses remediation contractors on larger jobs, and New Hampshire requires paid residential mold assessors to hold a national certification. Illinois has passed a remediator registration law that is not in effect yet. In every other state, we found no state license for mold inspectors or remediators, so the credential you see on a business card is usually a private training certificate, not a government license.

That matters because no federal limits exist for mold in homes. No national number says how much mold is too much, and no federal agency licenses the people who look for it. Whether your inspector is regulated depends entirely on where you live. This guide covers what each licensing state requires, how to look up a license, and what to do in a state with no rules at all. The state rules below were last reviewed in October 2026.

Mold assessor and remediator license rules by state

In the states that regulate mold work, the law usually separates two jobs. The mold assessor (often called a mold inspector) evaluates the problem and writes the cleanup plan. The mold remediator removes the mold. Several states require separate licenses for each and bar one company from doing both on the same property, which removes the incentive to find more mold than is there.

State mold licensing rules as of October 2026. All other states: no state license found (not individually confirmed with each state).
StateWho must be licensedAgencyHow to verify
TexasAssessors and remediators (workers registered)Texas Department of Licensing and Regulation (TDLR)TDLR mold license search page
FloridaAssessors (MRSA) and remediators (MRSR) on jobs over 10 square feetFlorida Department of Business and Professional Regulation (DBPR)MyFloridaLicense.com
New YorkAssessors, remediation contractors and mold supervisorsNYS Department of Labor, Mold ProgramLabor Department search tool on data.ny.gov
LouisianaRemediation contractors on projects worth $7,500 or moreLouisiana State Licensing Board for Contractors (LSLBC)LSLBC contractor search
District of ColumbiaAssessors and remediatorsDC Department of Energy and Environment (DOEE)Call DOEE at (202) 535-2600
New HampshirePaid residential assessors only (national third party certification)NH Office of Professional Licensure and Certification (OPLC)Ask for the certification and the issuing body
IllinoisNo one yet (remediator registration pending)Illinois Department of Public Health (IDPH)No list exists yet

Texas: the strictest small-job exemption

In Texas, mold assessors and remediators who work for pay must hold a license from the TDLR Mold Assessors and Remediators program, and remediation workers must be registered. A homeowner may clean small areas under 25 contiguous square feet or do their own work without a license. Before you hire anyone, look the person and the company up on the TDLR mold search page. If the name does not come up, that person cannot legally do paid mold assessment or remediation in Texas.

Florida: separate licenses and a 12 month rule

In Florida, DBPR issues two licenses under its Mold-Related Services program: MRSA for mold assessors and MRSR for mold remediators. A license is required for jobs over 10 square feet. A company may not both assess and remediate the same structure within 12 months. If the inspector who found your mold offers to remove it too, that is a red flag under Florida rules. Verify any license number at MyFloridaLicense.com.

New York: three license types under Labor Law Article 32

In New York, the State Department of Labor runs the Mold Program under Labor Law Article 32. Mold assessors and mold remediation contractors must be licensed, and the program also licenses mold supervisors. As in Florida, the same company cannot do both the assessment and the cleanup on one property. You can search licensed mold contractors through the Labor Department's search tool on data.ny.gov. For other home environment data in the state, see New York air quality by county and Can You Drink Tap Water in New York?.

Louisiana, Washington DC and New Hampshire

[Louisiana](/air-quality/louisiana/) licenses remediation rather than inspection. A contractor needs an LSLBC mold remediation license for mold remediation projects worth $7,500 or more, and assessment training is part of earning that license. Ask for the license number and check it on the board's contractor search.

[Washington DC](/air-quality/district-of-columbia/) requires people who assess or remediate mold to hold a DOEE mold license and to notify DOEE about their projects. DOEE says to call (202) 535-2600 to confirm a license.

[New Hampshire](/air-quality/new-hampshire/) takes a lighter approach. Under RSA 310-A:189-b, anyone paid to do residential mold assessment must hold a valid national third party mold assessment certification. This is a certification requirement, not a state license, and remediators are not covered.

Illinois: a law on the books, not yet in force

Illinois passed a mold remediation registration law, Public Act 103-0893, but it is not in effect until IDPH finishes rulemaking. Until then, remediators are not required to register and there is no state list to check. Treat Illinois like an unregulated state for now.

How to find a mold inspector in a state with no license

In most states there is no state license to look up, so you have to do the vetting yourself. A few checks go a long way:

  • Ask what the credential is. A certificate from a training course is not a state license. Ask who issued it and whether it can be verified.
  • Keep inspection and cleanup separate. The licensing states that bar one company from doing both did so for a reason. You can apply the same rule voluntarily.
  • Ask what the inspector will actually do. EPA advises fixing moisture and cleaning visible mold rather than sampling. Because no federal limits exist for mold in homes, a lab number has no official standard to compare against.
  • Get the cause in writing. A useful report names the moisture source, such as a leak, condensation or high humidity, not just the presence of mold.
  • Compare written quotes. Ask each company for the scope of work in square feet so you can compare like with like.

When you may not need an inspector at all

Mold grows where moisture stays. EPA advises keeping indoor humidity below 60%, ideally 30-50%, and fixing the water source before or alongside any cleanup. For a small patch, the licensing states themselves draw the line: Texas lets homeowners clean areas under 25 contiguous square feet, and Florida's license requirement starts at jobs over 10 square feet. Larger areas, mold that keeps returning, or mold you cannot locate are when a licensed assessor earns the fee.

Limits of this data

The table covers the states where we found a mold licensing rule. For the remaining states, we found no state license for mold inspectors or remediators, but we did not individually confirm that with each state. Some cities or counties may have their own rules. Rules change, so confirm with the state agency before you hire, and see our methodology for how we source state data.

What to do next

If you live in a licensing state, look up any inspector or remediator on the agency's search tool before you sign anything. Then fix the moisture source, because that is what EPA puts first. While you are checking your home's air, check your radon risk too: radon has nothing to do with mold, and a basement or crawl space can have both problems. Our radon pages show county radon zones, which describe counties rather than individual houses, so a test is the only way to know your own home's level. If a test comes back high, you can get radon mitigation quotes from local installers. For more home health guides, browse our guides or look up your area in our city pages.

Questions

Do mold inspectors need a license?

Only in some places. Texas, Florida, New York and Washington DC license mold assessors, New Hampshire requires paid residential assessors to hold a national third party certification, and in most other states we found no state license.

Who is certified to remove mold?

In Texas, Florida, New York and Washington DC, paid mold remediators must hold a state license, and in Louisiana contractors need an LSLBC mold remediation license for projects worth $7,500 or more. Homeowners can generally do their own work, and Texas lets them clean small areas under 25 contiguous square feet.

Are mold remediation companies legit?

Many are, but in most states there is no state license to prove it. In a licensing state, verify the company on the agency's search tool, and anywhere, be cautious of a company that wants to both assess and remediate the same home, which Florida and New York prohibit.

Should I pay for mold testing?

Often not. EPA advises fixing moisture and cleaning visible mold rather than sampling, and no federal limits exist for mold in homes, so a test result has no official standard to compare it to.

How do I keep mold from coming back?

Fix the moisture source and keep indoor humidity below 60%, ideally 30-50%, as EPA advises. Cleaning without fixing the water problem usually means the mold returns.

Sources

How we match cities to utilities and verify disinfectants: methodology.